Home Assistant launches SkyConnect USB stick with Zigbee, Thread, Matter support

The Home Assistant SkyConnect is a USB stick with support for Zigbee, Matter, and Thread connectivity designed to work with the popular Home Assistant open-source home automation solution, and enables users to bring Home Assistant Yellow (previously known as Home Assistant Amber) functionality to any platform running Home Assistant.

The USB dongle is based on a Silicon Labs EFR32MG21 Gecko Series 2 Arm Cortex-M33 wireless microcontroller with an 802.15.4 multi-protocol 2.4 GHz radio that can concurrently run both Zigbee 3.0 (EmberZNet/EZSP) and Thread/Matter (OpenThread/Spinel) stacks/protocols at the same time by using firmware in RCP RCP (Radio Co-Processor) mode.

Home Assistant SkyConnect specifications:

The SkyConnect dongle supports Over-The-Wire (OTW) firmware updates, which will notably enable Matter support in November since at launch only Zigbee and Thread are supported. The USB stick will ship with a 50cm extension cable because the "USB 3.0 ports (the ones with blue on the inside) are known to cause significant noise and radio interference to any 2.4Ghz wireless devices".

The Home Assistant SkyConnect USB stick is up for pre-order for $29.99 on Seeed Studio, Ameridroid, and several European distributors that you can find on the product page. The first batch is supposed to ship in November or December. The price tag is higher than for the Sonoff ZBDongle-E ($19.90) based on the same EFR32MG21 microcontroller, but the official dongle is quite smaller and I suppose you’d sponsor the open-source project that way.

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.

Support CNX Software! Donate via cryptocurrencies or become a Patron on Patreon